With hydrogen’s versatile applications in power generation, biomass and biogas generation, fuel cells and more, reliable thermal mass flow meters can greatly improve the accuracy of your business’ gas flow.
Engineers and plant operators responsible for producing, using, dispensing, or distributing hydrogen (H2) gas will find accurate and rugged flow meter solutions in the ST Series Thermal Flow Meters from Fluid Components International (FCI).
These precision H2 calibrated flow meters provide a range of products for any pipe diameter and virtually any installation conditions and require no routine maintenance.
Hydrogen is again a focus of global attention as a renewable energy fuel resource. Production processes from fossil sources, biomass and waste and H2O-splitting are capturing worldwide investor attention as brown, green, grey, and blue alternative fuels.
It is also a key gas used in ammonia manufacturing in the agricultural chemicals industry, methanol production and other processes. Regardless of the source, accurate, repeatable and reliable flow meters are a critical component in the processes.
Hydrogen-calibrated thermal mass flow meters are well-suited to meet the conditions of these applications.
Thermal mass flow meters work based on the principles of heat transfer. H2 has a very high heat transfer rate and to measure it with high accuracy and repeatability, a thermal flow meter should be calibrated in actual H2.
Applying theoretical gas equivalency equations to “correct” readings for H2 are inadequate and ineffective for this gas.
FCI’s ST Series thermal flow meters are calibrated under customer installation conditions in actual hydrogen to achieve impressive accuracy and repeatability in their intended application.
The meters are direct mass flow measuring and inherently multivariable providing both flow and temperature outputs. Thermal mass flow meters, with their no moving parts design, also virtually eliminate wear, breakage and maintenance.
The ST series has a wide selection of process connections, including compression fittings, NPT male and female threaded connections, flanges, ball valves, hot taps and more to ensure installation site compatibility.
The ST family offers solutions from small, compact meters with basic 4-20mA analogue output to feature-enhanced versions with multiple 4-20mA outputs, digital bus communications such as HART, Modbus, Foundation Fieldbus, and Profibus, in-situ calibration, self-checks, on-board data logging, and more.
All FCI ST Series H2 flow meters are direct mass flow measuring, carry global agency approvals for installation in Div.1/Zone 1 environments, and offer superior ruggedness and long-life with NEMA 4X/IP 67 rated low-copper content aluminium or 316 stainless steel enclosures.
Standard turndowns of 100:1 and flow ranges from 0.07 NMPS to 305 NMPS ensure their application versatility. The ST’s transmitter/electronics can be integrally mounted with the flow body or may be remote mounted to 305m away.
They are available in either DC or AC powered versions. Their readout/display options include basic flow rate and totalizer to a best-in-class multivariable digital/graphic backlighted LCD with FCI’s exclusive through-the-glass activated 4-button array.
In hydrogen applications with limited straight-runs and/or for operating in transitional flow ranges that can adversely affect accuracy and repeatability, ST Series Flow Meters are also optionally available with and calibration-matched to Vortab ® Flow Conditioners to ensure installed performance.
For further information contact AMS Instrumentation & Calibration Pty Ltd on
03-9017 8225, or Freecall (NZ) 0800 442 743, alternatively on e-mail:
[email protected] or visit their web site at www.ams-ic.com.au
This sponsored editorial is brought to you by AMS Instrumentation & Calibration. For more information, visit www.ams-ic.com.au .
AGL’s proposed 250MW pumped hydro project is taking the next step, with AGL and Idemitsu Australia Resources agreeing to...
In a world first, Melbourne Water and Deakin University’s CADET Virtual Reality Training and Simulation Research Lab are working...
The Federal and Victorian Governments have signed an agreement which will make $103 million of federal funding available for...
An engineering and construction company has secured a two year national panel contract with Ericsson for nbn fixed wireless...
After the successful implementation of the Energy Efficiency Improvement Scheme (EEIS), the ACT Government has announced it will expand...
The NSW Labor Opposition has announced further renewable energy commitments, which will be implemented if it wins the 23...
The NBN rollout has recently picked up momentum around the country with an additional 44,709 homes and businesses in...
A major concern in the highways maintenance industry relates to continued strikes to buried utilities (electricity, gas, telecommunications, and...
With hydrogen’s versatile applications in power generation, biomass and biogas...
In the region around the Greek capital Athens, pressure regulating valves (PRV) ...
Duckbill valves offer a wide range of benefits over standard valves in water and...
Too often on construction sites – when unexpected situations occur or a differ...
It’s common to think of HDD drilling spreads in terms of rig size, but the tru...
Water, sewer, gas, electricity, NBN. Engineering, construction & maintenance
Horizon Power will soon begin the roll-out of its new project, set to create a digital environment to use smart technologies to improve asset management in regional and remote Western Australia. https://bit.ly/3wNchi1
An Australian water company has been recognised as one of the world’s top utilities, winning a distinction for Public Water Agency of the Year at the 2022 Global Water Awards in Spain. https://bit.ly/3PKPFGc
Jemena’s $16 million Malabar Biomethane project has begun equipment work on its upgrader package in Australia’s first biomethane-to-gas network project. https://bit.ly/3MOWKUg @JemenaLtd #biomethane #malabarbiomethane
The Victorian Budget 2022/23 has included $24.8 million towards the Dingley Recycled Water Scheme to bring recycled water to Kingston, Monash, and Bayside communities. https://bit.ly/3MO13zf
With hydrogen’s versatile applications in power generation, biomass and biogas generation, fuel cells and more, reliable thermal mass flow meters can greatly improve the accuracy of your business’ gas flow. https://bit.ly/3GcozmW
If you’d like to find out more about us, please get in touch – we’d love to hear from you.
©2022 Utility Magazine. All rights reserved
We're not around right now. But you can send us an email and we'll get back to you, asap.